Symmetricom TimeProvider 500 series Reference Guide

TMSL 097-44018-26 Issue 2: Sep 99
Page 12
INIT-REG Initialize Register 3
INIT-SYS Initialize System 5
OPR-ACO-ALL Operate ACO All 1
OPR-PROTNSW Operate Protection Switch 2
OPR-SWDX-PORT Operate Switch Duplex Port 3
OPR-SYNCNSW Operate Synchronization Switch 4
REPT-ALM Report Alarm (Autonomous)
REPT-EVT Report Event (Autonomous)
RLS-PROTNSW Release Protection Switch 2
RLS-SWDX-PORT Release Switch Duplex Port 3
RLS-SYNCNSW Release Synchronization Switch 4
RMV-EQPT Remove Equipment 4
RMV-PORT Remove Port 3
RST-EQPT Restore Equipment 4
RST-PORT Restore Port 3
RTRV-ALM Retrieve Alarm 1
RTRV-ATTR-CONT Retrieve Attribute Control 2
RTRV-ATTR-PORT Retrieve Attribute Port 1
RTRV-COM Retrieve Communication 1
RTRV-COM-CONN Retrieve Communication Connection 1
RTRV-COND Retrieve Condition 1
RTRV-DA-EQPT Retrieve Delay Activation Equipment 1
RTRV-EQPT Retrieve Equipment 2
RTRV-GPS-STAT Retrieve GPS Statistics 2
RTRV-HDR Retrieve Header 1
RTRV-INVENTORY Retrieve Inventory 2
RTRV-LOG Retrieve Log 1
RTRV-MSG-EQPT Retrieve Message Equipment 1
RTRV-MSG-PORT Retrieve Message Port 1
RTRV-PM-PORT Retrieve Performance Monitoring Port 2
RTRV-PORT Retrieve Port 1
Table B. Command/Message Names and Access Levels (Contd)
COMMAND/MESSAGE EXPANDED NAME
ACCESS
LEVEL

Symmetricom TimeProvider 500 series Specifications

General

Brand	Symmetricom
Model	TimeProvider 500 series
Category	Data Loggers
Language	English