TMSL 097-44018-26 Issue 2: Sep 99
Page 58
COMMAND CODE: ENT-USER-SECU
PURPOSE
ENTER USER SECURITY
This command enters a new user including the user’s name, password, and access level. The user name
and password are case (uppercase/lowercase) sensitive, therefore use care when assigning these param-
eters. One user is assigned at the factory, and up to 16 additional users can be assigned (for a total of 17
users).
INPUT FORMAT
ENT-USER-SECU:[<tid>]:<uid>:<ctag>::<pid>,,<uap>;
EXAMPLE
Input:
ENT-USER-SECU::BIG:155::CLOUD,,3;
Response:
SANJOSE-114 1997-12-08 15:04:13
M 155 COMPLD
;
This example, tagged as command 155, changes the access level to 3 for user BIG whose password is
CLOUD.
parameter values meaning
uid up to 10 alpha-numeric characters user name
pid up to 10 characters (see note be-
low)
password identification
uap 1–5 user access level (5 is highest level)
Note: The password can have a minimum of 1 character and a maximum of 10 characters. At least one alpha
character must be used. Alpha characters can be uppercase, lowercase, or a mixture of both. Any printable char-
acter can be used except: comma (,), colon (:), semicolon (;), null (), space ( ), ampersand (&), and equal sign (=).
To Next Page
Loading...
Need help?
General
