TMSL 097-44018-26 Issue 2: Sep 99
Page 76
COMMAND CODE: RMV-EQPT
PURPOSE
REMOVE EQUIPMENT
This command removes a card from service into a maintenance state.
INPUT FORMAT
RMV-EQPT:[<tid>]:<aid>:<ctag>;
The parameter values in the table below are as follows:
a = 1–2 b = 1–11 c = 1–12 (1–10 for TOTA-5 &TOTA-M)
EXAMPLE
Input:
RMV-EQPT::PSM-5:134;
Response:
SANJOSE-114 1997-12-08 15:04:13
M 134 COMPLD
;
This example, tagged as command 134, removes PSM-5 from service.
aid meaning
CLK-a Clock card
DCIM-a DCIM card
GTI-a GTI card
LTI-a LTI card
MCA MCA card
MRC-a MRC card
PSM-b PSM card
TO-c timing output card
To Next Page
Loading...
Need help?
General
