Symmetricom TimeProvider 500 series Reference Guide

TMSL 097-44018-26 Issue 2: Sep 99
Page 82
COMMAND CODE: RTRV-ATTR-CONT
PURPOSE
RETRIEVE ATTRIBUTE CONTROL
This command displays the control preferences set by the SET-ATTR-CONT command.
INPUT FORMAT
RTRV-ATTR-CONT:[<tid>]:<aid>:<ctag>;
OUTPUT FORMAT
<sid> <date> <time>
M <ctag> COMPLD
"<aid>:<conttype>[,<protmode>,
<P1>,<P2>,<P3>,<P4>,<P5>,<P6>,<P7>,<P8>,<P9>,<P10>]"
;
EXAMPLE
Input:
RTRV-ATTR-CONT::SHELF:145;
Response:
SANJOSE-114 1997-12-08 15:04:13
M 145 COMPLD
"SHELF:RVRT"
;
aid meaning
DCIM-ALL DCIM card protection mode (stand-alone or combined)
GTI-ALL SSM mode for GTI-17 and GTI-18 cards (none; SSMT for GTI-17 cards; SSME or SSMEC for
GTI-18 cards)
MCA output protection type for timing output cards other than TO-EA, TO-EA5, EA10, EA10M, EA20,
and EA20M (revertive/nonrevertive, automatic/manual, and protection priority for each output slot)
MIS SSM mode for specified shelf (none; SSMT for DCIM-T and TOTA-M cards; SSME or SSMEC for
DCIM-E, EA-10M, and EA20-M cards)
SHELF output source selection mode (revertive or nonrevertive) for master and all expansion shelves
TO-ALL output protection type for TO-EA, TO-EA5, EA10, EA10M, EA20, and EA20M timing output cards
(none/1 for 1/1 plus 1)

Symmetricom TimeProvider 500 series Specifications

General

Brand	Symmetricom
Model	TimeProvider 500 series
Category	Data Loggers
Language	English