TMSL 097-44018-26 Issue 2: Sep 99
Page 130
COMMAND CODE: RTRV-TH-MSG
PURPOSE
RETRIEVE THRESHOLD MESSAGE
This command displays the persistence delay for DCIM cards and the nonswitching message delay,
switching message delay, and the holdover message delay for the shelf.
INPUT FORMAT
RTRV-TH-MSG:[<tid>]:<aid>:<ctag>;
The parameter values in the table below are as follows:
a = 1–2 or ALL
RESPONSE FORMAT
<sid> <date> <time>
M <ctag> COMPLD
"<aid>:[<durmsg>,,,]|[,<nswmsg>,<swmsg>,<hldovrmsg>]"
;
aid for card meaning
DCIM-a DCIM-EA, DCIM-T Specified DCIM card(s)
SHELF shelf Shelf
To Next Page
Loading...
Need help?
General
