Symmetricom TimeProvider 500 series Reference Guide

Issue 2: Sep 99 TMSL 097-44018-26
Page 75
COMMAND CODE: RLS-SYNCNSW
PURPOSE
RELEASE SYNCHRONIZATION SWITCH
This command cancels the OPR-SYNCNSW command and returns to (hardware control) revertive or
nonrevertive selection mode as determined by the SET-ATTR-CONT command.
INPUT FORMAT
RLS-SYNCNSW:[<tid>]:TO-ALL:<ctag>;
EXAMPLE
Input:
RLS-SYNCNSW::TO-ALL:134;
Response:
SANJOSE-114 95-12-08 15:04:13
M 134 COMPLD
;
This example, tagged as command 134, puts the system in hardware control mode.

Symmetricom TimeProvider 500 series Specifications

General

Brand	Symmetricom
Model	TimeProvider 500 series
Category	Data Loggers
Language	English