Issue 2: Sep 99 TMSL 097-44018-26
Page 99
COMMAND CODE: RTRV-GPS-STAT
PURPOSE
RETRIEVE GPS STATISTICS
This command displays the operating statistics of the GPS. This command may take up to 40 seconds to
execute.
INPUT FORMAT
RTRV-GPS-STAT:[<tid>]:<aid>:<ctag>;
The parameter values in the table below are as follows:
a = 1–2
RESPONSE FORMAT
<sid> <date> <time>
M <ctag> COMPLD
"<aid>"
/*
UTC-TIME=a,
LOCATION=b,
SAT-IN-VIEW=c,
[SAT-d=e], ...
GTIMDEV=f,
OSC1FFREQ=g,
OSC2FFREQ=h
*/
;
Note: The system occasionally returns an SARB error message in response to the RTRV-GPS-STAT
command. If this occurs, repeat the command.
aid meaning
GTI-a specified GTI card
To Next Page
Loading...
Need help?
General
