Symmetricom TimeProvider 500 series Reference Guide

TMSL 097-44018-26 Issue 2: Sep 99
Page 80
COMMAND CODE: RTRV-ALM
PURPOSE
RETRIEVE ALARMS
This command lists all active alarms on any card or port in a system (RTRV-ALM-ALL), specific equip-
ment alarms (RTRV-ALM-EQPT), or specific facilities (RTRV-ALM-PORT). The optional parameters
specify alarms by severity, type, or whether they affect service. If a piece of equipment is not in alarm,
use the RTRV-COND command to retrieve its condition.
INPUT FORMAT
RTRV-ALM-{ALL|EQPT|PORT}:[<tid>]:<aid>:<ctag>;
The following values can be used for the variables in the table below:
a = 1–2 e = 1–4 or ALL
b = 1–11 f = 2–4 (f > e)
c = 1–12 (1–10 for TOTA-5 &TOTA-M) g = 1–10 (1–20 for EA20) or ALL
d = 1–2 or ALL h = 2–10 (2–20 for EA20) (h > g)
command aid
RTRV-ALM-ALL SHELF
RTRV-ALM-EQPT CLK-a
DCIM-a
GTI-a
LT I-a
MCA
MRC-a
PSM-b
SHELF
TO-c
RTRV-ALM-PORT DCIM-a-d
MRC-a-e[&&-f]
PSM-b-e[&&-f]
TO-c-g[&&-h]

Symmetricom TimeProvider 500 series Specifications

General

Brand	Symmetricom
Model	TimeProvider 500 series
Category	Data Loggers
Language	English