TMSL 097-44018-26 Issue 2: Sep 99
Page 24
COMMAND CODE: DISC-COM
PURPOSE
DISCONNET COMMUNICATION
This command initiates a disconnection sequence on the specified communication port. This command
must be entered on a communication port other than the one specified in the command (where the PAD
is located).
INPUT FORMAT
DISC-COM:[<tid>]:<aid>:<ctag>;
EXAMPLE
Input:
DISC-COM::COM-1:144;
Response:
SANJOSE-114 1997-12-08 15:04:13
M 134 COMPLD
;
This example, tagged as command 144, disconnects communication port 1.
aid meaning
COM-1 communication port 1 (backplane D connector)
COM-2 communication port 2 (backplane D connector or front panel RJ connector)
COM-3 communication port 3 (backplane D connector)
To Next Page
Loading...
Need help?
General
