Symmetricom TimeProvider 500 series Reference Guide

Issue 2: Sep 99 TMSL 097-44018-26
Page 85
COMMAND CODE: RTRV-COM
PURPOSE
RETRIEVE COMMUNICATION
This command displays configuration information for the specified communications ports.
INPUT FORMAT
RTRV-COM:[<tid>]:<aid>:<ctag>;
RESPONSE FORMAT
<sid> <date> <time>
M <ctag> COMPLD
"<aid>" ...
/*BAUD= <value>, MONMSG= <value>, KEEPALIVE= <value>
, COMTYPE= <value>, ENDOFTEXT= <value>, ECHO= <value>
, COMPRI= <value>, HWCONTROL= <value>, SWCONTROL= <value>
, DUR= <value>, DN= <value> ...*/
;
aid meaning
COM-1 communication port 1 (backplane D connector)
COM-2 communication port 2 (backplane D connector or front panel RJ connector)
COM-3 communication port 3 (backplane D connector)
COM-ALL all communication ports
parameter value meaning
baud 1200 1200 baud
9600 9600 baud
monmsg ALW this port is allowed to view communication messages associated with other
communication ports in real-time
INH this port is inhibited from viewing communication messages associated with oth-
er communication ports in real-time
keepalive ALW this port is allowed to autonomously output a COMPLD message every 15 to 20
min
INH this port is inhibited from autonomously outputting a COMPLD message every
15 to 20 min

Symmetricom TimeProvider 500 series Specifications

General

Brand	Symmetricom
Model	TimeProvider 500 series
Category	Data Loggers
Language	English