Symmetricom TimeProvider 500 series Reference Guide

Issue 2: Sep 99 TMSL 097-44018-26
Page 83
COMMAND CODE: RTRV-ATTR-PORT
PURPOSE
RETRIEVE ATTRIBUTE PORT
This command displays the notification code associated with a condition type. Alarms are reported auto-
matically by the REPORT ALARM message or retrieved using the RETRIEVE ALARM command.
INPUT FORMAT
RTRV-ATTR-PORT:[<tid>]:<aid>:<ctag>;
The following values can be used for the variables in the table below:
a = 1–2 d = 2–4 (d > c)
b = 1–2 or ALL e = 1–11
c = 1–4 or ALL
RESPONSE FORMAT
<sid> <date> <time>
M <ctag> COMPLD
"<aid>:<ntfcncde>,<condtype>" ...
;
Refer to Table A and Table F for parameter values.
aid meaning
DCIM-a-b DCIM card a, port b
MRC-a-c[&&-d] MRC card a, port d (and optionally through port e)
PSM-e-c[&&-d] PSM card f, port d (and optionally through port e)

Symmetricom TimeProvider 500 series Specifications

General

Brand	Symmetricom
Model	TimeProvider 500 series
Category	Data Loggers
Language	English