TDSi DIGIgarde PLUS - Enrolling a Password

User Setup
DIGIgarde PLUS User Guide
Last Change Copyright © 2012 TDSi
13 May, 2016 Page 27
3.2.2
3.2.23.2.2
3.2.2 Enrolling a
Enrolling a Enrolling a
Enrolling a p
pp
password
asswordassword
assword
To enrol a password, follow the first steps described in the previous section. On the
Enrol User menu, use the ▲▼ keys to select the Enrol Pwd option. Click on the
OK button.
1. If the password is for a new user account, press the OK button (to add a
fingerprint to an existing user account, press the ESC button).
2. DIGIgarde PLUS displays the ID it will assign as the User ID for this account.
The ID is a 9-digit number. As you enrol users, DIGIgarde PLUS
automatically increments the ID starting from 000000001 for the first new
user. If you want to enter a specific number, type it in using the keypad
starting with the highest digit.
3. Click on the OK button to continue.
4. The password is a 5-digit number.
5. Confirm the password by entering it a second time. If you make a mistake
the screen will be redisplayed.
Enrol Pwd
New Enrol?
ESC
OK
New Enrol
Input Pwd *****
Pwd Confirm
_
-
_
---
-
New Enrol
Input Pwd _-_----
ESC
OK
New Enrol
ID 000000002
ESC
OK
Enrol User
Enrol FP
► Enrol Pwd
FP & Pwd