TDSi DIGIgarde PLUS - The Options Menu; Table 9 Options Menu Categories

DIGIgarde PLUS User Guide
Last Change Copyright © 2012 TDSi
13 May, 2016 Page 31
4.
4.4.
4. Device Settings
Device SettingsDevice Settings
Device Settings
4.1
4.14.1
4.1 The O
The OThe O
The Options
ptionsptions
ptions menu
menumenu
menu
To alter any of the DIGIgarde PLUS settings, press the Menu button and, if
necessary, verify your identity.
1. Press the ▼ key to select Options.
2. Press the OK button. The Options menu is displayed.
3. The system options are divided into the following categories:
Table 9 Options menu categories
Options menu
category
Use
System Opt Date and time settings, on-screen language, date
format, lock timings.
Power Mng Set the time for the unit to enter its hibernation mode
after a period of inactivity.
Comm Opt Configure communications settings, for example, baud
rate, IP address
Log Opt Set alarm notifications for data logs approaching full
capacity.
LED Mode Set unit in Standalone or Controller (ACU controlled)
mode.
Data Out Type Choose protocol for data output: Wiegand or Magnetic.
Access Options Set time periods and define user groups.
Auto Test Run internal tests for screen defects, voice prompts,
fingerprint reader, keypad operation and real-time clock.
To view further Options menu categories, use the ▼ key to scroll down past the
first three categories.
Options
↓
► System Opt
Power Mng
Comm Opt
Menu
↓
User Manage
► Options
Sys Info