TDSi DIGIgarde PLUS - Enrolment

User Setup
DIGIgarde PLUS User Guide
Copyright © 2012 TDSi Last Change
Page 24 13 May, 2016
3.2
3.23.2
3.2 Enrolment
EnrolmentEnrolment
Enrolment
The DIGIgarde PLUS provides four ways to enrol a user:
Fingerprint Enrolment.
Password Enrolment.
Note. On the DIGIgarde PLUS, a ‘Password’ is a 5-digit number.
Combined Fingerprint and Password Enrolment.
Mifare card (see page 28).
You can choose the enrolment method to suit a particular user. For example, a
user with poor quality fingerprints can be given a password verification option.
To enrol a user:
1. Press the Menu button.
If you have registered an Administrator, Manager or Enroller account, you
are prompted to verify your identity (see page 7). After you have done this,
press the Menu button again.
2. Press the OK button to select the User Manage menu option.
3. Press the OK button to select the Enrol User menu option.
4. Use the ▲▼ keys to select the required option:
Enrol FP enrol a fingerprint to a new or existing user.
Enrol PWD Enrol a password to a new or existing user.
FP & Pwd Enrol a fingerprint and password to a new or existing user.
Enrol User
► Enrol FP
Enrol Pwd
FP & Pwd
User Manage
↓
► Enrol User
FP Card Mng
Enrol Admin
Menu
↓
► User Manage
Options
Sys Info