TDSi DIGIgarde PLUS - Enrolling a Fingerprint and Password; Card Enrolment

User Setup
DIGIgarde PLUS User Guide
Copyright © 2012 TDSi Last Change
Page 28 13 May, 2016
6. DIGIgarde PLUS prompts you to save the password and confirm the
enrolment. Press the OK button or press ESC to cancel the enrolment.
7. If you want to enrol other new users, press the OK button when prompted to
continue. Otherwise, press ESC to return to the Enrol User menu.
3.2.3
3.2.33.2.3
3.2.3 Enrolling a
Enrolling a Enrolling a
Enrolling a f
ff
fingerprint and
ingerprint and ingerprint and
ingerprint and p
pp
password
asswordassword
assword
To enrol a fingerprint and password for the same user, follow the first steps
described in the previous section. On the Enrol User menu, use the ▲▼ keys to
select the FP & Pwd option. Click on the OK button.
Now follow the steps on pages x and x respectively.
3.3
3.33.3
3.3 Card
Card Card
Card enrolment
enrolmentenrolment
enrolment
To enrol a user and set up smart card authentication:
1. Press the Menu button.
If you have registered an Administrator, Manager or Enroller account, you
are prompted to verify your identity. After you have done this, press the
Menu button again.
2. Press the OK button to select the User Manage menu option.
User Manage
↓
Enrol User
► FP Card Mng
Enrol Admin
Menu
↓
► User Manage
Options
Sys Info
E
nrol User
Enrol FP
Enrol Pwd
►
FP & Pwd
New Enrol
Continue?
ESC
OK
New Enrol
000000001-0
ESC
OK(Save)