TDSi DIGIgarde PLUS - Advanced Options; Table 10 Advanced Options

Device Settings
DIGIgarde PLUS User Guide
Copyright © 2012 TDSi Last Change
Page 36 13 May, 2016
4.1.6
4.1.64.1.6
4.1.6 Advanced Options
Advanced OptionsAdvanced Options
Advanced Options
The commands and sub-menus available in the Advanced Options menu are
summarised below.
Table 10 Advanced options
Advanced Option Use Default
Reset Opts Restore all setup options to factory default
settings.
Del AttLogs Delete attendance logs stored on DIGIgarde
PLUS.
Clear All Data Clear all data including all enrolled user
information and attendance logs.
Clr Admin Pri Downgrade the Administrator’s privileges to
those of normal user. Note. This option is only
available to users with Administrator status.
Show Score Choose whether to display the verification score
for fingerprint matching (this may affect the
verification speed).
No
Match Thr Set the threshold level for 1:N matching 45
1:1 Thr Set the threshold for 1:1 verification 25
Voice Choose whether to have voice prompts and
feedback
Yes
FPCard Key Choose this option if you want the DIGIgarde
PLUS to write the password to a card (6-digit
PW???)
Button Beep Choose whether DIGIgarde PLUS beeps after
each key press
Yes
Adj VOL(%) Choose the audio volume of the DIGIgarde
PLUS: H(igh, (M)edium or (L)ow
Medium
AntiPassback Choose the anti-passback mode: None, Out, In,
InOut, NoAndSa
None
Adv Option
↓
► Reset Opts
Del AttLogs
Clear All Data