TDSi DIGIgarde PLUS - Assigning a Time Pattern to a Group; Assigning a Time Pattern to a User; User Access Options; Selecting the User

Standalone Mode
DIGIgarde PLUS User Guide
Last Change Copyright © 2012 TDSi
13 May, 2016 Page 45
7. Press the OK button to confirm your changes and save the time period.
8. Define time patterns for each day of the week.
Up to 50 time patterns can be created and each time pattern can be assigned to
individual users or groups.
5.4.1
5.4.15.4.1
5.4.1 Assigning a Time Pattern to a Group
Assigning a Time Pattern to a GroupAssigning a Time Pattern to a Group
Assigning a Time Pattern to a Group
1. Back in the Access Options menu, use the ▼ key to select Grp TP Define.
Press the OK key.
2. Use the ▲▼ keys to select the number of the group (1-5). Press OK.
3. To edit the first time pattern (TP1 - assigned to time pattern 1 by default).
Press OK.
4. Use the ▲▼ keys to select the required time pattern. Press OK.
5. If required, repeat the procedure for TP2 and TP3.
6. Press ESC, and when prompted to save the settings, press OK.
The Access Options menu is displayed.
5.4.2
5.4.25.4.2
5.4.2 Assigning a Time Pattern to a User
Assigning a Time Pattern to a UserAssigning a Time Pattern to a User
Assigning a Time Pattern to a User
By default, a user inherits the time patterns of their group but it is possible to set up
independent user-specific time patterns. These options are set in the User Access
Options menu (see below).
5.5
5.55.5
5.5 User Access
User Access User Access
User Access O
OO
Options
ptionsptions
ptions
User Access Options allow you to:
Assign a user to a group.
Apply group or individual time patterns.
Apply the group or an independent verification method.
5.5.1
5.5.15.5.1
5.5.1 Selecting the User
Selecting the UserSelecting the User
Selecting the User
From the Access Options menu
1. Select User Acc Opts. Press the OK button.
2. Enter the user’s ID. Press the OK button. The User Options menu is
displayed.
GRP1 Def TP
↓
► TP1 1
TP2
TP3
Group TP Define
Group No
1
ESC
OK