TDSi DIGIgarde PLUS - Device Info Menu; Free Space Info Menu; Table 18 Device Info Settings; Table 19 Free Space Info Settings

System Information
DIGIgarde PLUS User Guide
Copyright © 2012 TDSi Last Change
Page 54 13 May, 2016
6.2
6.26.2
6.2 Device Info
Device InfoDevice Info
Device Info m
mm
menu
enuenu
enu
Options and settings on the Device Info menu are summarised in the following
table.
Table 18 Device Info settings
Menu option Purpose
FPCnt (100) Fingerprint Count
Capacity of the device for storing fingerprint templates
(in hundreds); default 80 (8000)
AttLog (10k) Attendance Log
Capacity of the device for storing attendance logs
(10,000s), default 5 (50,000)
S Logs S Logs
Capacity of the device for storing s logs; default 4096.
Manu Time Manufacture Time
Date and time of manufacture
Serial Num Serial Number of device
Vendor
This device’s manufacturer: TDSi
Device Name
This device’s name: DIGIgarde PLUS
Alg Version Algorithm version number: V10
Firmware Ver Firmware version number
View MAC MAC Address
MCU Version MCU version
6.3
6.36.3
6.3 Free Space Info
Free Space InfoFree Space Info
Free Space Info m
mm
menu
enuenu
enu
Options and settings on the Free Space Info menu are summarised in the following
table.
Table 19 Free Space Info settings
Menu option Purpose
FP Cnt Remaining capacity of the device for storing fingerprint
templates
Att Log Remaining capacity for storing attendance logs
Fail Record Remaining capacity for storing information about failed
verification attempts
S Logs Remaining capacity for storing S Logs