TDSi DIGIgarde PLUS - Date Format

Device Settings
DIGIgarde PLUS User Guide
Last Change Copyright © 2012 TDSi
13 May, 2016 Page 33
3. Use the ▲▼ keys to cycle between the available languages:
ENG (English)
FRA (French)
ITA (Italian)
SCH (Simplified Chinese)
SPA (Spanish)
ARABIC (Arabic)
DUT (Dutch)
4. Press the OK button to confirm your selection.
If you change the setting, the DIGIgarde PLUS will not display menus and prompts
in the new language until the unit is switched off and back on again.
4.1.3
4.1.34.1.3
4.1.3 Date Format
Date FormatDate Format
Date Format
To change the date format:
1. From the Options menu, use the ▲▼ keys to select Fmt. Note that the
currently selected format is displayed alongside. Press the OK button.
2. The date format is highlighted.
3. Use the ▲▼ keys to cycle between the available date formats:
YY-MM-DD
YY/MM/DD
YY.MM.DD
MM-DD-YY
MM/DD/YY
MM.DD.YY
DD-MM-YY
DD/MM/YY
DD.MM.YY
YYYYMMDD
4. Press the OK button to confirm your selection.
System Opt
↓
Date Time
Language ENG
►
Fmt
YY
-
MM
-
DD
System Opt
↓
Date Time
Language ENG
►
Fmt
YY
-
MM
-
DD