Teac WX-7000 Instruction Manual

52
8.4. Channel Property
It is possible to change the display of the waveform display area for each channel.
It is possible to display in engineering units by applying coefficient to a voltage that is input to the
input connector.
Using the engineering unit and “OFFSET” affects to not only waveform but also Bar graph and
Digital displaying.
8.4.1. Converting Units
Enter coefficient and unit to conversion in "Conversion coefficient and unit" of the red frame on
the right side below. Use the pre-conversion value if necessary.
Conversion coefficient and unit
Pre-conversion value

Teac WX-7000 Specifications

General

Brand	Teac
Model	WX-7000
Category	Voice Recorder
Language	English