Teac WX-7000 Instruction Manual

70
Step 3 Control play/stop on Master unit
Playback control (play/stop) is done on the Master unit. Slave unit automatically starts/stops
playback in synch with the Master unit.
Step 4 Switch from VIEW mode to REC mode on the Slave unit
Click on the REC button of the WX Navi being connected to the Slave unit to switch back to REC
mode, if you already finished playback.
Step 5 Switch from VIEW mode to REC mode on Master unit
Click on the REC button of the WX Navi being connected to the Master unit to switch back to the
REC mode.
The Slave unit must be returned to the REC mode before the Master unit is switched back to the
REC mode.

Teac WX-7000 Specifications

General

Brand	Teac
Model	WX-7000
Category	Voice Recorder
Language	English