6. TERMINAL FILE PROGRAMMING
EO3-11106
6.16 Display item Name Programming
6-83
6.16 Display Item Name Programming
Display Item Name to be displayed on the LCD display can be programmed here. (Max. 16 characters)
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Main Menu
ECR is being outside a sale and in SET mode.
Depress [↓] then [Enter].
or
Depress [2].
“2 NAMES” is selected.
Depress the [↓] key seven times then
[Enter] key.
or
Depress [8].
“8 DISPLAY ITEM NAME” is selected.
Select a display item name of which
name is to be programmed with the [↑]
or [↓] key.
The display item name already programmed is displayed.
[Enter]
The ECR enters character input mode.
Input a display item name.
A maximum of 16 one-byte or 8 two-byte characters are input.
[Enter]
The display item name is entered and printed.
[End]
This programming is ended. A long receipt is issued and the
display returns to Main Menu screen.
NOTES:
1. A maximum of 16 characters can be programmed as the name or message for each Item Code.
2 As shown in the table on the following page, the standard program data is pre-programmed for each Item
Code. (which is auto-set after a RAM Clear). Therefore, program only the name or message that needs to
be changed.
OPERATION
CONDITION
To Next Page
Loading...
