6. TERMINAL FILE PROGRAMMING
EO3-11106
6.24 PLU Preset Price Setting or Changing
6-120
6.24 PLU Preset Price Setting or Changing
The preset price of each PLU may be set in the PLU TABLE PROGRAMMING already described. However, in
setting or changing the price only (not other programmed data), the following operation will be more convenient.
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Main Menu
ECR is being outside a sale and in SET mode.
Depress [↓] twice then [Enter].
or
Depress [3].
“3 DP/PLU” for Department/PLU table programming is selected.
Depress [↓] then [Enter].
or
Depress [2].
“2 PLU” is selected.
Depress [↓] then [Enter].
or
Depress [2].
“2 UNIT PRICE” is selected.
Input a PLU code of which PLU preset
price is to be set or changed.
PLU code: Max. 4 digits (1 to 9999)
[PLU]
Input 1st preset price, then [Enter].
Max. 6 digits (0 to 999999) (NOTE1)
Input 2nd preset price, then [Enter].
Max. 6 digits (0 to 999999) (NOTE1)
Input 3rd preset price, then [Enter].
Max. 6 digits (0 to 999999) (NOTE1)
[PLU]
The preset prices are entered and printed. (NOTE3)
[End]
This setting is ended. A long receipt is issued and the display
returns to Main Menu screen.
OPERATION
CONDITION
To Next Page
Loading...
Need help?
General
