6. TERMINAL FILE PROGRAMMING
EO3-11106
6.20 Department Preset Price Setting or Changing
6-104
6.20 Department Preset Price Setting or Changing
The preset price of each department may be set in the DEPARTMENT TABLE PROGRAMMING already
described. However, in setting or changing the price only but not other programmed data, the following operation
will be more convenient.
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Main Menu
ECR is being outside a sale and in SET mode.
Depress [↓] twice then [Enter].
or
Depress [3].
“3 DP/PLU” for Department/PLU table programming is selected.
Depress [1] or [Enter] key.
“1 DP” is selected.
Depress [↓] then [Enter].
or
Depress [2].
“2 UNIT PRICE” is selected.
Select a department of which unit price
is to be preset with the [↑] or [↓] key.
Input a unit price value.
Max. 6 digits (0 to 999999) (See NOTE below.)
[Enter]
The department preset price is entered and printed.
[End]
This setting is ended. A long receipt is issued and the display
returns to Main Menu screen.
NOTE: When inputting 0 then depressing the [Enter] key, a zero price will be set to the department. If none of
unit price value is input then the [Enter] key is depressed, the department will be open (i.e. open-price
department).
3) Example
To preset the price €1,00 on Department 1 (FOOD):
Operation LCD Display Remarks
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
twice.
The cursor is moved on to “3 DP/PLU”.
(continued on the next page)
OPERATION
CONDITION
To Next Page
Loading...
Need help?
General
