6. TERMINAL FILE PROGRAMMING
EO3-11106
6.35 Report Item Print/Non-Print Setting
6-148
6.35 Report Item Print/Non-Print Setting
Items to be printed on Financial, Cashier, and Salesperson Reports are set here.
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Main Menu
ECR is being outside a sale and in SET mode.
Depress [↓] five times then [Enter].
or
Depress [6].
“6 OTHER” is selected.
Depress [1] or [Enter] key.
“1 REPORT PRINT ITEM” is selected.
Move the cursor on to a report item
name to be set with the [↑] or [↓] key.
Select either Print or Non-print status
for the report item name with the [←] or
[→] key.
[Enter]
[End]
This setting is ended. A long receipt is issued and the display
returns to Main Menu screen.
NOTES:
1. Items which are set with Print status will be printed on the reports. They are not affected by the open/close
status of the key.
2. Financial report item names are programmed in Section 6.14 Financial Report Item Name Programming.
3. All item names are set with Print status after performing a RAM Clear.
4. When the open/close status of the key is changed in the SFKC Programming, perform this setting again to
set the print/non-print status of the corresponding key.
OPERATION
CONDITION
To Next Page
Loading...
Need help?
General
