TEC MA-600 Series - Set

6. TERMINAL FILE PROGRAMMING EO3-11106
6.5 System Option Programming
6-30
System Option Table
Standard Bit Set (auto-set by RAM Clear)
ADDRESS NO. CONTENTS
0
19 CONSIGNMENT OPTION
BIT
NO.
ITEM SELECTIVE STATUS
STANDARD
STATUS
REMARKS
RESET
SINGLE-CONSIGNMENT
*
1
Single-Consignment or
Multi-Consignment
SET
MULTI-CONSIGNMENT
NOTE 1 below
RESET
PRINT
*
2
Date Print
SET
NON-PRINT
RESET
PRINT
*
3
Consecutive No. (of
Receipt) Print
SET
NON-PRINT
RESET
*
4
-- vacant --
SET
RESET
PRINT
*
5
Cashier Code Print
SET
NON-PRINT
RESET
PRINT
*
6
Logo, Store Message,
Commercial Message,
Footer Message Print
SET
NON-PRINT
RESET
NO FEED
*
7
Receipt feed after the
trailer line print
(5-line feed)
SET
FIVE-LINE FEED
RESET
NO FEED
*
8
Receipt feed after the
trailer line print
(10-line feed)
SET
TEN-LINE FEED
If both RESET, no receipt
feed is performed. (A long
receipt is issued.)
If both SET, a 10-line feed is
performed.
(NOTE 2 below)
NOTE 1: “SINGLE-CONSIGNMENT” means that consignment of the same item can be printed only once. (A second attempt to print the
same item will result in an error.)
“MULTI-CONSIGNMENT” means that consignment of the same item may be printed any number of times.
NOTE 2: The number of line feeds after printing a trailer line (cashier name, consecutive No., current time) is selected.
If only Bit No. 7 is SET, a five-line feed will be performed.
If both Bit No. 7 and No. 8 are SET, a ten-line feed will be performed.
If both are RESET, no line feed is performed.