6. TERMINAL FILE PROGRAMMING
EO3-11106
6.12 PLU Name Programming
6-66
6.12 PLU Name Programming
A maximum of 16 characters of PLU name is programmed here.
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Main Menu
ECR is being outside a sale and in SET mode.
Depress [↓] then [Enter].
or
Depress [2].
“2 NAMES” for various name programming is selected.
Depress the [↓] key three times then
[Enter].
or
Depress [4].
“4 PLU (ITEM NO.) NAME” is selected.
Select a PLU of which name is to be
programmed with the [↑] or [↓] key.
The PLU name already programmed is displayed.
[Enter]
The ECR enters character input mode.
Input a PLU name.
A maximum of 16 one-byte or 8 two-byte characters are input.
[Enter]
The PLU name is entered and printed.
[End]
This programming is ended. A long receipt is issued and the
display returns to Main Menu screen.
NOTE: A maximum of 16 one-byte characters or 8 two-byte characters can be entered. A combination of
both types is also available.
3) Example
To program “Tomato” as the name of PLU Code No. 0001.
Operation LCD Display Remarks
When the ECR is being outside a sale
and in SET mode, depress the [↓] key.
The cursor is moved on to “2 NAMES”.
(continued on the next page)
OPERATION
CONDITION
To Next Page
Loading...
