6. TERMINAL FILE PROGRAMMING
EO3-11106
6.12 PLU Name Programming
6-67
(continued from the previous page)
Operation LCD Display Remarks
Depress the [2] or [Enter] key.
Depress the [↓] key three times.
The cursor is moved on to “4 PLU (ITM NO.)
NAME”.
Depress the [4] or [Enter] key.
“4 PLU (ITM NO.) NAME” is selected.
Depress the [Enter] key.
(PLU Code No. 0001 is selected.)
When programming a name of another PLU,
move the cursor on to a desired PLU with the
[↓] or [↑] key, then depress the [Enter] key.
The [C] key depression clears the PLU
name already programmed.
The PLU name already programmed is
displayed.
Input a desired name.
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
Example of key operation)
[T] [A/a] [o] [m] [a] [t] [o] [Enter]
The [Enter] key depression results in
that the input name is entered and
displayed.
When the [Enter] key is depressed, the
programmed data is printed.
The [End] key depression allows the
ECR to end this programming.
A long receipt is issued and the display
returns to Main Menu screen.
TEC
STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
31-10-2005 MON #0
PLU NAME
0001 Tomato
0009 13:23TM
To Next Page
Loading...
