6. TERMINAL FILE PROGRAMMING
EO3-11106
6.30 Time Setting or Adjustment
6-137
6.30 Time Setting or Adjustment
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Main Menu
ECR is being outside a sale and in SET mode.
Depress [↓] four times then [Enter].
or
Depress [5].
“5 BASIC” is selected.
Depress [1] or [Enter].
“1 TIME” is selected.
Input a 4-digit time value.
4-digiti-time value (HHMM) (See NOTE below.)
[End]
This setting is ended. A long receipt is issued and the display
returns to Main Menu screen.
NOTE: If an hour value of more than 23 or a minute value of more than 59 is entered, the current data remains
unchanged by setting or adjusting the time.
3) Example
To set time “1:15 p.m. (13:15)”
Operation LCD Display Remarks
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
four times.
The cursor is moved on to “5 BASIC”.
Depress the [5] or [Enter] key.
“5 BASIC” is selected.
Depress the [1] or [Enter] key.
“1 TIME” is selected.
(continued on the next page)
OPERATION
CONDITION
To Next Page
Loading...
