6. TERMINAL FILE PROGRAMMING
EO3-11106
6.29 Negative Amount Key Limit Amount Setting
6-136
3) Example
To set the following preset amount on the keys below:
Key
Limit Amount
[VND CPN] 10.00
[STR CPN] 20.00
Operation LCD Display Remarks
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
three times.
The cursor is moved on to “4 RATE, LIMIT
AMOUNT”.
Depress the [4] or [Enter] key.
“4 RATE, LIMIT AMOUNT” is selected.
Depress the [↓] key three times.
The cursor is moved on to “4 DISC AMT
LIMIT”.
Depress the [4] or [Enter] key.
“4 DISC AMT LIMIT” is selected.
Input 1000, then depress the [Enter]
key.
(The limit amount of the [VND CPN]
key is set.)
While ? is shown on the upper-right corner
of the LCD display screen, the [?] key
depression results in that the following
guidance message appears on the LCD
display.
Input 2000, then depress the [Enter]
key.
(The limit amount of the [STR CPN]
key is set.)
The [End] key depression allows the
ECR to end this setting.
A long receipt is issued and the display
returns to Main Menu screen.
31-10-2005 MON #0
LIMIT TABLE
V.CPN
€
10,00
S.CPN
€
20,00
0025 13:55TM
To Next Page
Loading...
