6. TERMINAL FILE PROGRAMMING
EO3-11106
6.32 Store/Register No. Setting
6-140
6.32 Store/Register No. Setting
A maximum of 6 digits may be set as ID No. for the store and/or register. And once set, it will be printed on every
receipt.
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Main Menu
ECR is being outside a sale and in SET mode.
Depress [↓] four times then [Enter].
or
Depress [5].
“5 BASIC” is selected.
Depress [↓] twice then [Enter].
or
Depress [3].
“3 REGISTER NO.” is selected.
Input a 6-digit value.
6-digit value (0 to 999999)
[End]
This setting is ended. A long receipt is issued and the display
returns to Main Menu screen.
NOTE: The preceding zeros, if entered, will not be printed. For example, if “001234” is entered in the above
operation, “#1234” will always be printed as the Register No.
3) Example
To set the Register No. of this ECR 3001
Operation LCD Display Remarks
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
four times.
The cursor is moved on to “5 BASIC”.
Depress the [5] or [Enter] key.
“5 BASIC” is selected.
(continued on the next page)
OPERATION
CONDITION
To Next Page
Loading...
Need help?
General
