6. TERMINAL FILE PROGRAMMING
EO3-11106
6.25 PLU Preset-Code Key Setting
6-123
6.25 PLU Preset-Code Key Setting
When there are any keys programmed as PLU Preset-code Keys (SFKC 96) on the ECR Keyboard (ordinary or
Flat type), and /or when the PK-2 PLU Keyboard (hardware option) is connected to the ECR, a PLU code may be
preset to each of those keys in this operation.
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
• For PLU Preset-Code Key (SFKC 96)
Main Menu
ECR is being outside a sale and in SET mode.
Depress [↓] twice then [Enter].
or
Depress [3].
“3 DP/PLU” is selected.
Depress [↓] then [Enter].
or
Depress [2]
“2 PLU” is selected.
Depress [↓] twice then [Enter].
or
Depress [3].
“3 ASSIGN TO KEYBOARD” is selected.
Depress [↓] then [Enter].
or
Depress [2]
“2 PLU CODE KEY” is selected.
Input a PLU Code.
A 4-digit PLU code to be assigned to a key is specified.
[Enter]
Input a desired key location code.
See Key Location Code on the next page.
[Enter]
[End]
This setting is ended. A long receipt is issued and the display
returns to Main Menu screen.
OPERATION
CONDITION
To Next Page
Loading...
