6. TERMINAL FILE PROGRAMMING
EO3-11106
6.17 Error Item Name Programming
6-87
6.17 Error Item Name Programming
Error item names to be displayed on the LCD display are programmed here. A maximum of 16 one-byte
characters by 2 lines can be programmed.
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Main Menu
ECR is being outside a sale and in SET mode.
Depress [↓] then [Enter].
or
Depress [2].
“2 NAMES” is selected.
Depress the [↓] key eight times then
[Enter] key.
or
Depress [9].
“9 ERROR ITEM NAME” is selected.
Select an error code of which error item
name is to be programmed with the [↑]
or [↓] key.
The error item name already programmed is displayed.
[Enter]
The ECR enters character input mode.
Input an error item name.
A maximum of 16 one-byte characters are input.
[Enter]
The error item name is entered and printed.
[End]
This programming is ended. A long receipt is issued and the
display returns to Main Menu screen.
NOTES:
1. A maximum of 16 one-byte characters can be programmed as the error item name for each error code.
Enter all the characters in regular size.
2 As shown in the table on the following pages, the standard program data are preprogrammed (which is auto-
set after a RAM Clear). Therefore, program only the error item names that need to be changed.
OPERATION
CONDITION
To Next Page
Loading...
