6. TERMINAL FILE PROGRAMMING
EO3-11106
6.9 Department Name Programming
6-59
6.9 Department Name Programming
A maximum of 16 characters of department name is programmed here.
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Main Menu
ECR is being outside a sale and in SET mode.
Depress [↓] then [Enter].
or
Depress [2].
“2 NAMES” for various name programming is selected.
Depress [2] or [Enter] key.
“1 DP KEY NAME” is selected.
Select a department of which name is
to be programmed with the [↑] or [↓]
key.
The department name already programmed is displayed.
[Enter]
The ECR enters character input mode.
Input a department name.
A maximum of 16 one-byte or 8 two-byte characters are input.
[Enter]
The department name is entered and printed.
[End]
This programming is ended. A long receipt is issued and the
display returns to Main Menu screen.
NOTE: A maximum of 16 one-byte characters or 8 two-byte characters can be entered. A combination of
both types is also available.
OPERATION
CONDITION
To Next Page
Loading...
