6. TERMINAL FILE PROGRAMMING
EO3-11106
6.9 Department Name Programming
6-60
3) Example
To program “FOOD” as the name of Department 01.
Operation LCD Display Remarks
When the ECR is being outside a sale
and in SET mode, depress the [↓] key.
The cursor is moved on to “2 NAMES”.
Depress the [2] or [Enter] key.
“2 NAME” is selected.
Depress the [1] or [Enter] key.
“1 DP KEY NAME” is selected.
Depress the [Enter] key.
(Department 01 is selected.)
When programming a name of another
department, move the cursor on to a desired
department with the [↓] or [↑] key, then
depress the [Enter] key.
The [C] key depression clears the
department name already
programmed.
The department name already programmed
is displayed.
Input a desired name.
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
Example of key operation)
[F] [O] [O] [D] [Enter]
The [Enter] key depression results in
that the input name is entered and
displayed.
When the [Enter] key is depressed, the
programmed data is printed.
The [End] key depression allows the
ECR to end this programming.
A long receipt is issued and the display
returns to Main Menu screen.
TEC
STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
31-10-2005 MON #0
DP NAME
01 FOOD
0006 13:17TM
To Next Page
Loading...
