6. TERMINAL FILE PROGRAMMING
EO3-11106
6.35 Report Item Print/Non-Print Setting
6-149
3) Example
To set Item Code 3 “NEG GT” with Non-print status.
Operation LCD Display Remarks
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
five times.
The cursor is moved on to “6 OTHER”.
Depress the [6] or [Enter] key.
“6 OTHER” is selected.
Depress the [1] or [Enter] key.
“1 REPORT PRINT ITEM” is selected.
Depress the [↓] key twice.
(Item Code 3 (“NEG GT”) is selected.)
While ? is shown on the upper-right corner
of the LCD display screen, the [?] key
depression results in that the following
guidance message appears on the LCD
display.
Select either Print or Non-print status
with the [←] or [→] key.
The status reverses between Y and N with
the [←] or [→] key.
The [Enter] key depression results in
that the setting data is entered.
The [End] key depression allows the
ECR to end this setting.
A long receipt is issued and the display
returns to Main Menu screen.
TEC
STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
31-10-2005 MON #3001
REPORT PRINT
#003 NEG GT 0
#003 NEG GT 1
0032 13:25TM
To Next Page
Loading...
