6. TERMINAL FILE PROGRAMMING
EO3-11106
6.34 Tone Volume Setting
6-147
3) Example
To change the key tone from “HIGH” (default setting) to “LOW”.
Operation LCD Display Remarks
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
four times.
The cursor is moved on to “5 BASIC”.
Depress the [5] or [Enter] key.
“5 BASIC” is selected.
Depress the [↓] key four times.
The cursor is moved on to “5 KEY-IN TONE”.
Depress the [5] or [Enter] key.
“5 KEY-IN TONE” is selected.
Depress the [↑] key.
The cursor is moved on to “1 TONE
VOLUME (LOW)”.
Depress the [1] or [Enter] key.
“1 TONE VOLUME (LOW)” is selected.
The selected key tone sounds for 2
seconds.
The [End] key depression allows the
ECR to end this setting.
A long receipt is issued and the display
returns to Main Menu screen.
31-10-2005 MON #3001
KEY TONE
TONE VOLUME (LOW)
0031 13:23TM
To Next Page
Loading...
