6. TERMINAL FILE PROGRAMMING
EO3-11106
6.27 VAT or Add-on Tax Rate Setting
6-131
3) Example
To set the following VAT rate:
VAT1………10%
Operation LCD Display Remarks
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
three times.
The cursor is moved on to “4 RATE, LIMIT
AMOUNT”.
Depress the [4] or [Enter] key.
“4 RATE, LIMIT AMOUNT” is selected.
Depress the [↓] key
The cursor is moved on to “2 VAT/TAX
RATE”.
Depress the [2] or [Enter] key.
“2 VAT/TAX RATE” is selected.
Input 10, then depress the [Enter] key.
While ? is shown on the upper-right corner
of the LCD display screen, the [?] key
depression results in that the following
guidance message appears on the LCD
display.
Depress the [↓] six times.
The [End] key depression allows the
ECR to end this setting.
A long receipt is issued and the display
returns to Main Menu screen.
TEC
STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
31-10-2005 MON #0
VAT/TAX RATE
VAT1 10%
0023 13:51TM
To Next Page
Loading...
