6. TERMINAL FILE PROGRAMMING
EO3-11106
6.39 Special Rounding Process Setting, 1-digit type
6-162
Operation LCD Display Remarks
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
five times.
The cursor is moved on to “6 OTHER”.
Depress the [6] or [Enter] key.
“6 OTHER” is selected.
Depress the [↓] key five times.
The cursor is moved on to “6 ROUND TBL 1
DIGIT”.
Depress the [6] or [Enter] key.
“6 ROUND TBL 1 DIGIT” is selected.
Input 200, then depress the [Enter]
key.
While ? is shown on the upper-right corner
of the LCD display screen, the [?] key
depression results in that the following
guidance message appears on the LCD
display.
Input 705, then depress the [Enter]
key.
The [End] key depression allows the
ECR to end this setting.
A long receipt is issued and the display
returns to Main Menu screen.
TEC
STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
31-10-2005 MON #3001
ROUNDING1
200
705
0036 13:33TM
To Next Page
Loading...
Need help?
General
