6. TERMINAL FILE PROGRAMMING
EO3-11106
6.40 Special Rounding Process Setting, 2-digit type
6-164
Example of Denmark rounding
For the Denmark rounding, the amount total is rounded as shown below.
Pre-rounded value of the
two least effective digits
Post-rounded value
0 to 12 00
13 to 37 25
37 to 62 50
63 to 87 75
88 to 112 100
3) Example
To set the Denmark rounding.
Pre-rounded value of the
two least effective digits
Post-rounded value
0 to 12
00
13 to 37
25
37 to 62
50
63 to 87
75
88 to 112
100
Operation LCD Display Remarks
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
five times.
The cursor is moved on to “6 OTHER”.
Depress the [6] or [Enter] key.
“6 OTHER” is selected.
Depress the [↓] key six times.
The cursor is moved on to “7 ROUND TBL 2
DIGITS”.
Depress the [7] or [Enter] key.
“7 ROUND TBL 2 DIGITS” is selected.
Input 1200, then depress the [Enter]
key.
While ? is shown on the upper-right corner
of the LCD display screen, the [?] key
depression results in that the following
guidance message appears on the LCD
display.
(continued on the next page)
Ignore in setting
To Next Page
Loading...
