Technifor T08 User Manual

101
M_T08_EN_B
Menu: Variables
Example 4: Reset at 00:00 on January 1st (once a year)
Note
Ifthe hours and minutes 󰄈eldsare not 󰄈lled in, thedefaultvalue is 0. The valueof the seconds is
always 0.
To obtain a reset once a year at a prede󰘰ned date and time, 󰘰ll in all the 󰘰elds.
Example: Reset every year on March 29th at 21h40:
Reset with each change of shift
If this type of reset is selected, the counter returns to its initial value with each change of shift.
See: Con󰘰guring shifts
Reset each time the week changes
You can reset all the counters to zero every x weeks, on a speci󰘰ed day and at a speci󰘰ed time. Resetting a
counter to zero will impact all marking 󰘰les.
Select a day of the week. Go to the corresponding areas to choose the reset date.
Example: Reset every 2 weeks, on Monday at 00:00

Technifor T08 Specifications

General

Brand	Technifor
Model	T08
Category	Controller
Language	English