Technifor T08 - Page 67

67
M_T08_EN_B
Functions
Type of condition: select the condition type.
- TEXT: comparing 2 text 󰘰elds - This 󰘰eld may contain set text, key words (date, hour...), the content of
a counter, etc.
- LENGTH: comparison of 2 string lengths - This 󰘰eld may contain set text, key words (date, hour...), the
content of a counter, etc.
- NUMERICAL: comparison of 2 numeric 󰘰elds - The values must be numerical.
Note
LENGTH: the screen displays 1 new 󰘰eld(s): Length in digits.
Box ticked: the program compares the number of characters in the 󰘰rst value with the number indicated in the
second value.
Box not ticked: the program compares the number of characters in the 󰘰rst value with the number of characters
in the second value.
Example 1:
When the content of the counter K1 is greater than 3 characters: The 󰘰le marking continues normally.
Example 2: