Technifor T08 User Manual

68
M_T08_EN_B
Functions
Contents of variable V1: 123
When the content of the counter K1 is greater than 3 characters (length of V1): the 󰘰le marking continues
normally.
Example 3:
When the content of counter K1 is not greater than 99: the program immediately starts marking the block
indicated (3 block).
Values to compare: input the values to compare.
Type of comparator: select the type of comparator for the 2 values.
Number of block to reach (if the condition is not ful󰘰lled):
• if the condition is not ful󰘰lled: the program immediately starts marking the block indicated. You cannot
indicate an earlier block number in the 󰘰le (no going backwards).
• if the condition is ful󰘰lled: the 󰘰le marking continues normally.

Technifor T08 Specifications

General

Brand	Technifor
Model	T08
Category	Controller
Language	English