FLEXability LINE: Service & Maintenance Manual - rev. 1.0
3. INSTALLING AND MOVING THE
MACHINES
3.1. SPECIFICATIONS AND REQUIREMENTS
For proper installation of the equipment, make sure that:
1. The equipment is installed on a level, vibration-free surface with a sufficient capacity to support
its weight plus that of the user.
2. The area is not dusty or sandy.
3. You have observed the temperature and humidity operating requirements indicated in paragraph
2.3. “Ambient specifications”.
3.2. INSTALLING THE MACHINES
The machine is supplied on a wooden pallet, wrapped in nylon bag and packed in a carton.
The installation instructions are packaged and delivered with the machine. By the way, here below
you can find them for any needs.
3.2.1. ANTERIOR
Page 3.1
To Next Page
Loading...
