Technogym FLEXability ME05 - Tools to Use

FLEXability LINE: Service & Maintenance Manual - rev. 1.0
Page 10.2
10.2. TOOLS TO USE
The following tools are necessary to carry out all disassembly, adjustment and maintenance
operations on the machines:
• Medium-sized Philips screwdriver;
• Medium-sized flat screwdriver;
• 5-gauge wrench;
• 8-gauge wrench;
• 10-gauge wrench;
• 13-gauge wrench;
• 17-gauge wrench;
• 19-gauge wrench;
• 3-gauge hexagonal T-wrench;
• 4-gauge hexagonal T-wrench;
• 5-gauge hexagonal T-wrench;
• 6-gauge hexagonal T-wrench;
• 8-gauge hexagonal T-wrench;
• Circlip pliers;
• Hammer.
CAUTION: Tool measurements are expressed in mm.
All manuals and user guides at all-guides.com