Technogym Forma - Page 40

FORMA: Service & Maintenance manual - rev. 3.0
Page 5.2
When the machine is turned on it will perform a power-on test which:
• sounds the buzzer;
• lights all the LEDs;
• resets the elevation.
After completing this power-on test the machine enters standby mode, awaiting a keyboard
command.
To check the correct operation of the machine:
• get on the machine;
• press the “Start” key on the keyboard to begin exercising;
• check that the belt motor starts;
• press the “+” and “−” keys on the keyboard and check that the tread-belt speed changes
accordingly;
• press the “↑” and “↓” keys on the keyboard and check that the machine elevation changes
accordingly;
• operate the “Safety switch” and check that the tread-belt stops;
• put on the heart rate transmitter and check that the machine correctly measures the heart rate
value.