Technogym SKILLROW - Reading Firmware Versions; Cpu) Firmware Version; Ble;Ant+) Firmware Version; Reading And Writing The Serial Numbers And Identification

6.2.1 READING FIRMWARE VERSIONS
6.2.1.1 (CPU) FIRMWARE VERSION
Command Notes
Command @FWVER#
Prints the CPU rmware version. It’s the BA
version of the SKILLROW.
Table 13
6.2.1.2 (BLE/ANT+) FIRMWARE VERSION
Command Notes
Command @NRFFWVER#
Prints the rmware version of the BLE/ANT+
module. It’s the CA version of the SKILLROW.
Table 14
6.2.2 READING AND WRITING THE SERIAL NUMBERS AND IDENTIFICATION
PARAMETERS
6.2.2.1 WRITING THE EQUIPMENT SERIAL NUMBER
Command Notes
Command @STG_ID id# Sets the equipment serial number.
Table 15
The parameter id indicates the equipment serial number.
6.2.2.2 READING THE EQUIPMENT SERIAL NUMBER
Command Notes
Command @RTG_ID# Prints the equipment serial number.
Table 16
SKILLROW:
Technical Service Guide - Rev. 1.1
Page 41e-mail: support@technogym.com