TECO F510 series - Chapter 2 Model Description; 2.1 Nameplate Data; 2.2 Model Identification

2-1
P/N BARCODE
S/N BARCODE
Chapter 2 Model Description
2.1 Nameplate Data
It is essential to verify the F510 inverter nameplate and make sure that the F510 inverter has the
correct rating so it can be used in your application with the proper sized AC motor.
Unpack the F510 inverter and check the following:
(1) The F510 inverter and quick setting guide are contained in the package.
(2) The F510 inverter has not been damaged during transportation there should be no dents or
parts missing.
(3) The F510 inverter is the type you ordered. You can check the type and specifications on the
main nameplate.
(4) Check that the input voltage range meets the input power requirements.
(5) Ensure that the motor HP matches the motor rating of the inverter.
2.2 Model Identification
F510 - 4 010 – E 3 F N4
Inverter Model and Motor Rating
UL and CE Marks
Input Power Specifications
Output Power Specifications
Series No.
F510
Inverter
Series
Voltage Rating
2: 200V
4: 400V
Motor Rating
001: 1HP
002: 2HP
003: 3HP
005: 5HP
008：8HP
150: 150HP
175: 175HP
215: 215HP
535：535HP
800：800HP
Input
Blank: 1Ph/3Ph
3: 3Ph
Noise Filter
Blank: No RFI
F: RFI Filer
Operator Type
H: Standard Type (LED Keypad)
C: Standard Type (LCD Keypad)
E: Enhanced Type (LED Keypad)
G: Enhanced Type (LCD Keypad)
Protection Class
Blank: IP00/IP20
N4: IP55