TECO F510 series - 11.11 Introduction to the EtherCAT high speed communication expansion module

11-42
11.11 Introduction to the EtherCAT high speed communication
expansion module
11.11.1 Communication hardware and data structure
This product is the EtherCAT high-speed communication expansion module (hereinafter referred to
as communication module); it can perform remote setting and communication functions through the
EtherCAT network environment. It can only be used with the TECO A510s/F510 AC motor driver
(hereinafter referred to as a driver), and allow the driver to operate on the EtherCAT network.
11.11.2 Product specifications
EtherCAT ports
Item Specifications
Connector Dual-port network socket
Network
protocols
EtherCAT communication protocol
AC motor driver port
Item Specifications
Connector Control board CN2 connector
Terminal
functions
1. The communication module communicates with the AC motor
driver through this interface.
2. The AC motor driver provides power to the communication
module through this interface.