TECO F510 series - 11.9 PROFIBUS high speed communication expansion card

11-19
11.9 PROFIBUS high speed communication expansion card
11.9.1 Communication hardware and data structure
This product is the PROFIBUS high-speed communication expansion module; it can perform
remote setting and communication functions through the PROFIBUS bus. It is used on the TECO
A510s/F510 AC motor driver (hereinafter referred to as the “driver”), and allows the driver to
operate on the PROFIBUS network.
11.9.2 Product specifications
PROFIBUS ports
Item Specifications
Connector DB-9
Transmission
rate
9.6Kbit/s to 12Mbit/s (automatic detection of transmission rate)
Network
protocols
PROFIBUS communication protocol
AC motor driver port
Item Specifications
Connector Control board CN2 connector
Transmission
method
SPI high speed communication
Terminal
functions
1. The communication module communicates with the AC motor
driver through this interface.
2. The AC motor driver provides power to the communication
module through this interface.
Communication
protocols
TECO communication protocol